StopRattle is designed to eliminate annoying interior rattles and squeaks.

The patent pending design features a hard plastic arrow and spine wrapped in a soft rubber wedge with barbs, allowing it to be pushed into interior trim pieces and ensuring it stays in place.

It works by either putting pressure on parts of the interior that are rattling or by spreading apart two interior joins that are rubbing together and squeaking.

StopRattle is great for cars, trucks, 4x4s and off-roaders, RVs and even marine applications and come with 4 small, 2 medium and 1 large.

Hard plastic arrow & spine with soft rubber barbed wedge

Push between trim pieces to eliminate rattles and squeaks

Includes: 4 x small, 2 x medium, 1 x large StopRattles

Installation Instructions

  1. While vehicle is moving, identify the area that is causing noise by pressing firmly along interior joins where rattle or squeak appears to be coming from, until it stops or reduces.* Alternatively, rattle may be located by gently banging with the palm or bottom of the hand on different areas of the interior or dash.

  2. Select the appropriate size of StopRattle according to the gap between the two joins of interior. Note - the wide end of the StopRattle should be slightly wider than the gap between the two interior pieces.

  3. Carefully and slowly press the StopRattle into the gap until it is nearly flush with the interior join. Note - be careful not to push it in too far so that it falls inside gap.

  4. Repeat steps 1 through 3 with additional StopRattles until all further rattles or squeaks have been eliminated.

*Ensure passenger is looking for noise and driver is not distracted. While StopRattle may eliminate most interior rattles and squeaks, it cannot guarantee total effectiveness if noise is coming from behind interior paneling. Installer uses StopRattle at own risk; and does not hold manufacturer, distributor or reseller liable for any damage caused by the use or misuse of this product.